Feedrate <FEDRAT>


<FEDRAT> defines the value and the type of tool feed. The feed value is stored until the next <FEDRAT> command or <RAPID> command.

SprutCAM uses <FEDRAT> to pass the machining condition code.

 

Command:

FEDRAT NM nm, K k, MMPM(315) | MMPR(316)

 

Parameters:

Parameter

CLD array

Description

nm

CLD[1]

CLD.NM

Feed value.

k

CLD[2]

CLD.K

Feed type (work feed, approach feed, retract feed, transition feed, cut-in feed, etc.).

For EDM operation SprutCAM uses this parameter to pass machining condition code.

MMPM(315)

MMPR(316)

CLD[3]

CLD.MMPM

Feedrate units:

MMPM(315) – mm per minute,

MMPR(316) – mm per revolution

 

 

 

See also:

Technology commands description

Rapid feedrate <RAPID>