Original point <FROM>


<FROM> command defines original point coordinates. Usually <FROM> command is called only once at the beginning of machining, the first transition coordinates commonly equal the <FROM> command coordinates. If is necessary to avoid output of original point into the NC-program use the <FROM> command to initialize register values without printing them out into the NC-program code. This prevents the output of movement commands if the travel coordinates equal those of the <FROM> command.

 

Command:

FROM X x, Y y, Z z

 

Parameters:

Parameter

CLD array

Description

x,

y,

z

CLD[1]

CLD[2]

CLD[3]

CLD.X

CLD.Y

CLD.Z

Original point coordinates

 

 

 

See also:

Technology commands description