The main toolbar


Main panel contain three tabs.

 

  • <Project>

f_clip0402

  • f_clip0405 –  Creates the new postprocessor's tuning file. The system resets its state before creation.
  • f_clip0406 – Opens the postprocessor's tuning file, which is saved earlier. The system resets its state before loading.
  • f_clip0407 – Saves the postprocessor's tuning file with the current name.
  • f_clip0408 – Saves the postprocessor's tuning file with new name.
  • f_clip0409 – Opens the technological commands file, generated by SprutCAM.
  • f_clip0410 – Requests new CLData files from SprutCAM.

 

  • <Control>

f_clip0403

  • f_clip0411 – Opens the postprocessor's tuning file.
  • f_clip0412 – Saves the postprocessor's tuning file. Both commads duplicate <Open> and <Save> functions from <Project> tab.
  • f_clip0413 – Cuts the selected text or register in the clipboard.
  • f_clip0414 – Inserts the selected text or register from the clipboard.
  • f_clip0415 – Copies the selected text or register in the clipboard.
  • f_clip0416 – Erase the selected text.
  • f_clip0417 – Searching of the gated in combination of characters in the text of the NC-program.
  • f_clip0418 – Find next.
  • f_clip0419 – Searching and replace of the gated in combination of characters in the text of the NC-program.
  • f_clip0420 – Cancel the last fluctuation made in the program of a handler technological command or a mask.
  • f_clip0421 – Return the last fluctuation made in the program of a handler of a technological command or a mask.
  • f_clip0422 – Runs the compilation of the command processing programs.
  • f_clip0423 – Runs the generation of the NC-program from the files of the tool motion trajectory. If the command processing programs aren't compiled, the compilation will be activated first.
  • f_clip0424 – Break NC-program generation.
  • f_clip0425 – Generate NC-program up to current position in a CLData.
  • f_clip0426 – Pause NC-program generation.
  • f_clip0427 – Generate NC-program with stopping in subprograms.
  • f_clip0428 – Generate NC-program with without stopping in subprograms.
  • f_clip0429 – Adds a new variable to the list of watches.
  • f_clip0430 – Compute variable or expressions. The evaluation is possible only in a debug mode.
  • f_clip0431 – Add breakpoint in a handler of technological commands or CLData files.
  • f_clip0432 – Requests new CLData files from SprutCAM.
  • f_clip0433 – Opens the window for editing the data about the NC-machine and the CNC-system.
  • f_clip0434 – Opens register parameters window.
  • f_clip0435 – Opens reinterpretations definitions window.
  • f_clip0436 – Opens system setup window.
  • f_clip0437 – Download file from SprutStore.
  • f_clip0438  – Save current project to SprutStore.

 

  • <Help>

f_clip0404

  • f_clip0439 – Shows postprocessors generator help.
  • f_clip0440 – Shows the contents of the help system.
  • f_clip0441 – Runs postprocessors generator tutorial.
  • f_clip0442 – Opens forum about SprutCAM and Postprocessor generator.
  • f_clip0443 – Prepare a message to «Sprut Technology» technical support.
  • f_clip0444 – Loads WEB-page about SprutCAM and Postprocessor generator.
  • f_clip0445 – Loads WEB-page of SPRUT Technology Inc.
  • f_clip0446 – Information about Postprocessors generator.

 

 

 

See also:

The main window