Tool change point <SAFPOS>


<SAFPOS> command defines the coordinates of the point, where the tool center will be positioned for the change of tool (<LOADTL> command), are defined. Tool change make in the current point as default.

 

Command:

SAFPOS X x, Y y, Z z, N n

 

Parameters:

Parameter

CLD array

Description

x,

y,

z

CLD[1]

CLD[2]

CLD[3]

CLD.X

CLD.Y

CLD.Z

Coordinates of point of tool change

N

CLD[4]

CLD.N

The number of point of tool change in the NC-machine

 

 

 

See also:

Technology commands description