Tool compensation <CUTCOM>


Use <CUTCOM> command to switch compensation mode for length or radius of the tool.

 

Command:

CUTCOM ON(71)|OFF(72), LENGTH(9)|R(23) lr, X x, Y y, Z z,

  XY n, YZ m, XZ k, RIGHT(24)|LEFT(8)

 

Parameters:

Parameter

CLD array

Description

ON(71)

OFF(72)

CLD[1]

CLD.OnOff

Command type:

71 – Enable compensation,

72 – Disable compensation.

LENGTH(9)

R(23)

CLD[2]

CLD.Length

Compensation kind:

9 – tool length compensation,

23 – tool radius compensation.

LR

CLD[3]

LCD.LR

Tool length or radius compensation value.

x,

y,

z

CLD[4],

CLD[5],

CLD[6]

CLD.X

CLD.Y

CLD.Z

Compensation along axes.

n,

m,

k

CLD[7],

CLD[8],

CLD[9]

CLD.N

CLD.M

CLD.K

Plane compensation values.

RIGHT(24)

LEFT(8)

CLD[10]

CLD.RGT

Tool radius compensation direction:

24 – right compensation,

9 – left compensation.

 

To create ISO postprocessor using masks use ISO.G values which correspond to <CUTCOM> parameters:

CLD parameter

ISO value

CLD[1] = 72,

CLD[2] = 9

ISO.G = 49

CLD[1] = 71,

CLD[2] = 9

ISO.G = 43

CLD[1] = 72,

CLD[2] = 23

ISO.G = 40

CLD[1] = 71,

CLD[2] = 23,

CLD[10] = 24

ISO.G = 42

CLD[1] = 71,

CLD[2] = 23,

CLD[10] = 8

ISO.G = 41

 

 

 

See also:

Technology commands description