Example of contour drawing


For a start need to enable <Snap to grid> on snaps panel.

 

  1. Indicate position of the start point.

 

clip0230

 

  1. Indicate position of the second point.

 

clip0231

 

  1. Turn to <Continue by arc> f_clip0765 mode.
  2. Indicate position of the third point.

 

clip0232

 

  1. Turn to <Continue by cut> f_clip0764 mode.
  2. Indicate position of the fourth point.

 

clip0233

 

  1. Turn to <Continue by arc> f_clip0765 mode.
  2. Finish buildings by pressing <Close profile> f_clip0763 button.

As result we are have this contour:

 

clip0234

 

 

 

See also:

Contour drawing