Example of contour construction on the set of points


For a start need to enable <Snap to grid> on snaps panel.

  1. Select <Profile - polyline> f_clip0766 mode.
  2. Indicate points in order from first to sixth.

 

clip0241

 

  1. Finish buildings by pressing <Close profile> f_clip0763 button.

As result we are have this contour:

 

clip0238

 

  1. Select <Profile - spline> f_clip0767 mode.
  2. Repeat same operations as polyline example.

 

clip0241

 

As result we are have this contour:

 

clip0239

 

Comment:        Contour visualization quality can be improved by changing aproximation value <M> in <Debugger> window as this:

 

K11=M(1),L11,P11,P12,P13,P14,P15,P16,P11,L11,Lr1

to:

K11=M(0.1),L11,P11,P12,P13,P14,P15,P16,P11,L11,Lr1

 

  1. Select <Profile by arcs> f_clip0768 method.
  2. Repeat same operations as 2 above examples.

 

clip0241

 

As result we are have this contour:

 

clip0240

 

 

 

See also:

Contour construction on the set of points