Adaptive roughing (HSC)


SprutCAM's module for efficient roughing.

Adaptive roughing strategy ensures that the high speed cutting conditions remain almost constant by which offers great improvements compared to conventional constant offset roughing strategies. The strategy avoids full-width cuts by constantly measuring the engagement volume of the tool with material and gradually removing material off the remaining stock. It guarantees stable load on the tool, which allows an increased material removal rate at higher feed rates and reduces the overall machining time.

 

Advantages:

  • Reduction in  machining cycle time
  • Extended tool  life

Features:

  • Supports 2-axis and 3-axis models
  • No full width cuts
  • Consistent engagement with material
  • Trochoidal like passes to progressively cut corners
  • Supports intermediate slices & rest roughing
  • Multi-core CPU support for  faster calculation times

 

This module is available at operations:

"Roughing waterline"

 

f_clip1166

 

Inspector's parameters for Adaptive roughing module

 

f_clip1167

 

"5ax multi surface"

 

f_clip1168

 

 

f_clip1169

 

 

 

 

This module is available for SprutCAM's configurations:

 

  • Machinist
  • 3x Mill
  • 5x MIll
  • Robot
  • Universal
  • Expert
  • Master
  • Pro

Remark: need additional license for module "Adaptive roughing". Or included to  "5D module" license .