Join


The <Join> feature is aimed to interlink existing elements into one contour. For fulfilling this operation, one should press the <Join by elements> f_clip0734 or <Join to intersection> f_clip0735. Required joining function selected from popup menu that activated by pressing right mouse button.

Conditions of joining:

  • Ends of joining curves should converge in one point;
  • Curves, united to the outline, can't be used for constructing another outline;

<Joining to intersection> from the indicated element to the first intersection is conducted automatically for both sides. Then one should with the help of cursor indicate an element in the direction of which the joining will be continued. Then you should with the help of cursor indicate an element in the direction of which the joining will be continued.

<Joining by elements> is applied for selected elements only.

To complete the joining the curve on the intersection you should press the f_clip0762 button when the final element is selected. The joining process is accomplished automatically if the constructed contour is closed.

Below you can see some examples of joining.

 

 

 

See also:

Environment of 2D geometrical constructions

The joining of the group of objects that don't contain branches to the open curve

The joining of the group of objects that contain branches to the open curve

The joining of the group of objects that don't contain branches to the closed loop

The joining of the group of objects that contain branches to the closed loop

Joining by elements