Profile copying with shifting


To construct a copy of a profile with parallel shifting it is required to do the following:

  1. Select the <Profile operations> f_clip0738.
  2. Select copying with shifting mode by pressing the f_clip0778 button.
  3. Select the source profile.
  4. The user can enter either the shift amount in the fields <A> (angle) and <M> (distance), or two points successively. If using points, the first point will be the start of the source coordinate system, the second – the start of the new (shifted) coordinate system.

 

ContourShift

 

 

 

See also:

Operations with profiles