Multiple profiles copying with rotation and joining


Profile rotation will be performed so that the start point of every subsequent copy will coincide with the last point of previous copy. For construction, it is necessary that the start and end profile points are at the same radial distance from the rotation center.

To construct a profile by rotation with joining, do the following:

  1. Select the <Profile operations> f_clip0738.
  2. Select profile construction by multiple rotation mode by pressing the f_clip0782.
  3. Select the source profile.
  4. Define the rotation center.
  5. Assign the number of copies in the parameter area <N>.

 

MultRot

 

 

 

See also:

Operations with profiles