Base configurations


The SprutCAM ® system is supplied in a few basic configurations. The configurations differ mainly in the availability of machining cycles.

  • SprutCAM Pro – the most complete version, containing operations for the 2D & 3D milling, engraving, cutting and turning of models including engraving and EDM. Designed for undertaking many tasks on 2-5 axis milling machines, lathes, cutters, turn-milling centers, wire EDM machines and robots.
  • SprutCAM Master – the version, containing operations for the 2D & 3D milling, engraving, cutting and turning of models including engraving. Designed for undertaking many tasks on 2-5 axis milling machines, lathes, cutters, turn-milling centers and robots.
  • SprutCAM Expert – the most complete milling version, containing operations for the 2D & 3D milling, engraving, cutting and EDM. Designed for undertaking many tasks on 2-5 axis milling machines, cutters and wire EDM machines.
  • SprutCAM 5x Mill – the version, containing operations for the 2D, 2.5D, 3D milling, 5D contouring, engraving of models. Designed for undertaking many tasks on 2-5 axis milling machines.
  • SprutCAM 3x Mill – the version, containing operations for the 2D & 3D milling, engraving. Designed for undertaking many tasks on 2-5 axis milling machines.
  • SprutCAM Robot – the version, containing operations for the 2D, 2.5D, 3D milling of models including engraving. Designed for undertaking many tasks on 2-12 axis robots.
  • SprutCAM Universal – containing operations for the 2D and 2.5D milling, engraving, cutting, turning and EDM. Designed for machining on lathes, engraving machines, cutters and wire EDM machines. Can be used for machining simple 3D parts with different flat levels on milling machines.
  • SprutCAM Machinist – containing operations for the 2D and 2.5D milling, engraving and cutting.
  • SprutCAM Lathe – containing the full kit of the lathe operations. Designed for the lathes and turning centers.
  • SprutCAM Cutting – containing the operations for the 2D milling and cutting. Designed especially for the 2-axis milling machines or cutters.
  • SprutCAM EDM – containing the operations for 2-axis, 2-axis with taper and full 4-axis wire EDM cutting. Designed especially for the wire EDM machines.

 

SprutCAM can be also supplied in other configurations designed especially for the customer.

 

 

 

See also:

Introduction to SprutCAM

Features matrix