Creating hole pattern


The system uses five types of pattern: <Linear>, <Circular>, <Angular>, <Concentric> and <Parallelogram>.

  • On the <Linear> page user can create linear holes pattern:

 

f_clip0953

 

f_clip0204_res

 

  • On the <Circular> page user can create circular holes pattern:

 

f_clip0954

 

f_clip0205_res

 

  • On the <Angular> page user can create linear holes pattern:

 

f_clip0955

 

f_clip0206_res

 

  • On the <Concentric> page user can create concentric holes pattern:

 

f_clip0956

 

f_clip0207_res

 

  • On the <Parallelogram> page user can create parallelogram pattern:

 

f_clip0957

 

f_clip0208_res

 

Using the hole patterns together with automatic determination of hole levels allows someone perform roughing machining of the part by the axial plunging strategy.

 

Image105

 

 

 

See also:

Job assignment for hole machining operation