Page tools <Library>


f_clip0961

 

A list of tools that are currently available for use is displayed on the <Library> tab. To use the parameters for a particular tool in the library, select the tool from the list and press the <Select> button. To add a new tool to the library, set the required parameters for the tool in the upper part of the window, and then press the insert button. To replace the selected tool in the library with a new one, using the parameters entered in the upper part of the window; press the <Change> button. To delete the selected tool from the library, press the <Delete> button.

 

Note:        The tool number in the library does not refer to the tool number in the NC program!

 

 

 

See also:

Defining the tool for the milling operation