Drilling cycle (G82, W5DFace(482))


Drilling cycle drills holes with rapid approach to the safe level, dwell at hole bottom level and rapid retract the safe plane level.

 

G82

 

Drilling cycle <G82> consist of the following steps:

  • Rapid tool motion to the hole center at the <Z return> level.
  • Rapid descend to the <Z safe> level.
  • Work feedrate motion to the <Z min> level.
  • <Dwell> at the <Z min> level.
  • Rapid tool return to the <Z return> level.

 

The time of delay is defined on the <Dwell> panel in the field <Bottom dwell>. The time can be specified in seconds or in the numbers of the tool revolutions. In the last case the time is calculated automatically using the defined tool RPM. Delay is absent if the bottom dwell is off.

 

f_clip0897

 

 

 

See also:

Hole machining operation

The ways of the holes machining