 #99
| Wed 21 Dec
2011
9:23 AM | |
Season`s Greetings
SPRUT Technology would like to thank our`s partners for business over the past year, for working with us and for the trust you put into us!
We wish you, your colleagues and families a wonderful Holiday and a Happy and Prosperous New Year!
SprutCAM Team |
|
#98
| Tue 25 Oct
2011
7:08 PM | |
New release of SprutCAM v7.1.6 is available
This release includes the main features that short described below:
The 1/2 and 3/4 turn views are now dynamically changing to ensure visibility of insides of a model irrespective to sight direction.
There was added "trunc(, )" operator to postprocessor;
Wire EDM - Now it is possible to use faces in the job assignment of a Wire EDM operation.
Wire EDM - added ability to create a pocketing of areas for "2D contouring" operation;
Turn operation "Lathe contouring" with job assignment "Roughing" and "Offset contouring" use workpiece for calculation toolpath;
Added possibility to set feed of transition (Traversal Feed) for each contour;
At "Technology" user can select part of model by color;
Force restart SprutCAM when duplicate run SprutCAM with user prompt;
New 5 axis machining:
Creation of complex continuous 5 axis machining;
Highly optimised 5 axis machining tool path calculations taking into consideration any remaining workpiece material;
Highly efficient and accurate simulation of the continuous 5 axis machining processes.
Highlights:
- Machine multiple NURB surfaces, STL Mesh or Wire-frame geometry;
- Multi-pass roughing techniques; Finish machining with lead-lag angle control;
- SWARF machining for side wall machining;
- 3 to 5-Axis toolpath conversion;
- 4-Axis Rotary machining;
- Application specific strategies for Blade, Blisk and Impeller machining; Machining Direction for 3+2-axis machining.
New light versions for the 5D module;
New Library Release for 5D module:
5axis: Morphed and spiral tool path for geodesic cycle;
5axis: Spiral tool path for constant-Z machining;
3axis: offset projection cuts;
Offset direction available for project curves within the triangle mesh tool path calculation;
Swap curves available for swarf machining;
Projection methods available for surface based tool path calculation;
Flatlands options for constant Z cycle;
Geodesic supports morphed toolpaths and containment curves.
Added support Autodesk Inventor 2012 for SprutCAMs Addin for Autodesk Inventor import;
Import/Addin manager. Now you can plug external cad file translators in SprutCAM to import file formats SprutCAM does not support by default. Just select the "ADDIN manager" from the "TOOLS" menu. In the dialog that appears click the "ADD" button and fill the parameters of the external cad translator such as translator name, full path to the translator executable, input and output extensions and command line. After that you will be able to import files supported by the translator.
Wishes and recommendations of users that work with previous version are taken also into consideration in new build.
To get more details about changes please contact to your reseller or mail to us:info@sprutcam.com |
|
#97
| Thu 29 Sep
2011
3:55 PM | |
|
#96
| Mon 5 Sep
2011
4:05 PM | |
|
#95
| Tue 16 Aug
2011
5:07 PM | |
MAQUITEC 2011 - Barcelona, Spain
October 18 - 22, 2011
MecDATA our partner in Spain will partake in "Maquitec" the 2nd most important exhibition fair in Spain, between the October 18 - 22, 2011 and will introduce SprutCAM system.
We invite you to visit us and get to know all our latest developments demonstration as well as actual training and help. |
|
#94
| Tue 16 Aug
2011
3:38 PM | |
New release of SprutCAM v7.1.5 is available
This release includes the main features that short described below:
- In SprutCAM added a new simulation method for the multiaxis:
- In the Simulation mode for the “Turbo 3D” button added three modes: solid, voxel 3D and voxel 5D. The new modeling method - voxel 5D - allows simulating 3-5 axis milling operations. The accuracy of the model, as well as for voxel 3D mode, determined by the resolution, available on the button at the bottom of the panel and moving the slider on the panel;
- The new type of simulation “Voxel 5D” is also available on the “Machining” section in the “Machine setup” properties – “Simulation method”;
- Added radius compensation tool for the finishing pass in the "Roughing waterline" and "Pocketing" operations;
- Improved support for Imperial system of measurement;
- And few dozen bugs fixed.
Wishes and recommendations of users that work with previous version are taken also into consideration in new build.
To get more details about changes please contact to your reseller or mail to us:info@sprutcam.com
|
|
#93
| Tue 5 Jul
2011
11:59 AM | |
New release of SprutCAM v7.1.4 is available
This release includes the main features that short described below:
- Added support for scripting languages. In VBScript and JScript, possible to program the desired toolpath or convert the original toolpath;
- In "Lathe contouring" operation áûë added a new type of machining - Advanced grooving;
- In all milling operations, added ability to specify a safe distance as a percentage of the machining step;
- In the template toolpath (parameters of operation window) possible to save and reuse the command groups. This will allow users more flexibility and clearly to customize output support the command in the G-code at the beginning and end of operation;
- Functionality has been expanded macros mode for template of the toolpath. Each macro has been added to the state of the macro: Auto, On, Off;
- Added a new command CLData - PPFun EndTechInfo, which is automatically added at the end of each operation;
- For 2D contouring operation added ability to use options "Base surface" exactly the same as earlier in the operations, "Pocketing" and "Engraving";
- In "Rotary machining" operation added the "Job zone";
- In "Rotary machining" operation improved algorithm for the "Side angle" parameter;
- In "Hole machining 5D" operation added a new way to make transitions between the processed holes - crossing a safe level;
- Improved algorithm for the use of workpiece type of prism;
- Updated scheme of machines, included in the installation: MoriSeiki NL2500 and Leader;
- The Lathe Threading operation improved algorithm taking into account the adjustment point tool;
- And few dozen bugs fixed.
Wishes and recommendations of users that work with previous version are taken also into consideration in new build.
To get more details about changes please contact to your reseller or mail to us:info@sprutcam.com |
|
#92
| Thu 19 May
2011
1:23 PM | |
SprutCAM selects ModuleWorks as CAM 5-axis component partner
We are happy to announce that June 2011 will see the release of the new SprutCAM 5-Axis module created in partnership with ModuleWorks.
ModuleWorks GmbH is at the forefront of 5-Axis machining technology, providing the machining and CNC simulation technology that powers many of the popular CAM systems available today.
Typical applications include aerospace wing components, automotive port machining, impeller machining, turbine blade machining, manufacture of cutting tools and trimming / de-flashing of plastic components.
To get more details about changes please contact to your reseller or mail to us:info@sprutcam.com |
|
#91
| Tue 26 Apr
2011
4:25 PM | |
|
#90
| Wed 6 Apr
2011
11:46 AM | |
New release of SprutCAM v7.1.3 is available
This release includes the main features that short described below:
- Added new universal lathe operation ‘Lathe contouring’. For full details see below and in the video on our FTP or on YouTube: Part 1, Part 2 and Part 3;
- Added support for single-pass threading cycle ISO G92;
- For milling operations added ability to specify a safe distance as a percentage of the machining step;
- Improved using the tool radius compensation for milling operations;
- Added support for smart snap in interactive indication of the components of the job assignment of the Wire EDM operation;
- Added option to export information in a file STCX-file for Toolslist;
- Decreased validity of the license that provided automatically (on-line);
- And few dozen bugs fixed.
Wishes and recommendations of users that work with previous version are taken also into consideration in new build.
To get more details about changes please contact to your reseller or mail to us:info@sprutcam.com |
|
|
Pages: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] |
Record: 90..99 of 99
|
|
